![]() Set this as appropriate for the USB driver that you’re using. The MASTER level indicator is lit, indicating the current value of the setting. Press the performance pad that corresponds with the setting you want to make. While holding down the button at the right side (R channel) of the browser section, use a USB cable to connect the DJ-202 to your computer continue holding down the button until the SEQUENCER section’s button blinks. Note: To use the USB Vendor mode you must have the Driver installed in your computer.ġ. Please contact technical support.DJ-202 USB Mode Setting, Vendor or Generic If you do not then there is a hardware issue with the device and it would require service. If you device is working you will see a message with data like below. Play any key(s) on your keyboard/controller to confirm each button or key is sending data to your computer. Once you confirm your MIDI device is connected and listed. Confirm that your USB/MIDI device is listed. Click on the Sources tab to view MIDI devices. Please contact technical support.ĥ Mac 1. Now press the button, knob, slider in question. Click on MixTrack Pro under MIDI Inputs, and then click OK. Click Options from the top menu, and select MIDI Devices. Download the free MIDI OX software here: 2. Solution: Test the device itself to see if a control on the device is not functioning. If the device is grayed out it is currently unavailable.Ĥ MIDI Troubleshooting Symptom: Not all controls on the device are functioning as they should. Once the device is plugged in and recognized it will appear in the window as solid. With the MIDI Studio window open, plug in your USB/MIDI keyboard or controller. If not click on Window at the top and make sure MIDI Studio is checked. Two windows should open the Audio Devices, and MIDI Studio. Hit Enter or select Audio MIDI Setup from the list. How to open Audio MIDI Setup Open Spotlight by pressing Command + Spacebar, or clicking the magnifying glass in the top right corner of your desktop. If it was listed but grey it is not being recognized by the Mac. In the example below you can see that the MixTrack Pro is plugged in and recognized. Within the Hardware tab, click on Device Manager.ģ Mac Open MIDI Studio to see if MixTrack Pro is connected and recognized. In the new window that pops up, click on the Hardware tab. Windows XP: Click on the Start menu Control Panel., run your mouse up to Settings, and click on In the window that pops up, double-click on System. Finally, in the left-hand column, click on Device Manager. In the window to the right, find the System icon and double-click it. In the left hand column of the window that pops up, click on Classic View. Click on the Start menu, then click on Settings, then Control Panel. How to open the Device Manager Windows 7: Windows Vista: Click on the Start menu, then the Control Panel, then Systems and Securities, then System, and finally click on the Device Manager in the left hand column. Windows Open the Device Manager to see if MixTrak Pro is listed under Sound, video, and game controllers. To confirm device is recognized by the computer check the Device Manager (Windows), or MIDI Studio (Mac). If a replacement cable is needed contact Numark support team.Ģ USB Troubleshooting Cont. The cable is just a standard A to B USB cable similar to a USB printer. If you have tried all available USB ports, try switching the USB cable with another device. This connection is usually stronger, faster and directly connected to the motherboard. If the customer is using a desktop computer recommend a USB port on the back of the tower. If using a USB hub is unavoidable it must be a powered USB hub. Ensure they are not going into a USB hub. This will ensure there is no conflict with another device. Remove all other USB devices from the equation. Solution: Ensure the Mixtrack Pro is recognized by the computer by trying the recommendations below. USB Troubleshooting Symptom: Serato DJ intro displays Hardware Disconnected. The Mic is not routed into the Serato Intro software. Solution: No FX can be applied to the mic. Symptom: No FX are applied to the microphone. Solution: Within the Serato Intro software click setup in the top right. ![]() Symptom: The music sounds slowed down, and distorted. ![]() Solution: Make sure the center Master Gain fader is also turned up as this controls all sound levels. Symptom: No sound from the speakers but the channel fader is up. ![]() Solution: Make sure the speakers are connected to red and white of Output 1 on the back of the Mixtrack Pro. 1 Numark Mixtrack Pro Troubleshooting Audio Troubleshooting USB Troubleshooting MIDI Troubleshooting Audio Troubleshooting Symptom: Headphone cue coming out of speakers.
0 Comments
Leave a Reply. |